During 1-step paint corrections, fine polishes paired with soft pads and DA polisher are used remove light defects, light swirls and light contamination while enhancing the overall gloss and look of the vehicle paint.

This is recommended every 2 years or so. Since very little clear coat is removed, it is safe to do many times. (*Unless previous vehicle owner used cutting compound many times or wet sanded or had poor clear coat sprayed on vehicle.

A 2-step paint correction is basically a 2 step process.

Step one: Cutting compounds and a rotary machine is used to remove medium to heavy defects, swirls, contaminants and light scratches.

*We would always set a one step sample first before attempting to set a 2-step sample.

Step Two: Corrected paint is then refined to a high gloss using a DA (dual-action) polisher with fine finish compounds.

Finish step: Paint protection is added by applying a coat of polymer paint sealant rated for 12-months of protection.

For extreme protecion, we can apply a 3 or 5 year ceramic coating which will trap the new high gloss and keep from fading due to damage from ultra violet light from the sun.

It also provides excellent hydrophobic properties which will make it a breeze to wash your vehicle. The extremely slick surface makes it difficcult for dirt to adhere to the paint surface.

Ceramic coating maintenance consists of a dedicated detail spray for ceramic coatings once every 2 to 3 months.